“No Signal” display or picture freezing on the television screen, this is common problem for DD Free Dish frequency setting. There are many reasons for it but most of the time we can face such problem of setup box setting when heavy rain has started. Due to continue raining, dish antenna ( reflector) reduces its reflection power.Because, most of the satellite dish antennas are 60 cm size. Otherwise local market LNBs are not so strong for reception weak signal. Remember when the DD Free Dish frequency setting is going on, Dish size,Best quality LNB can help for increase weak signal reception capability.DD Free Dish new channel list 2021.
DD Free Dish frequency setting
Solutions :
Solutions :
1. Dish size should be 90cm-120cm
2. Always try to use 0.01dB Ku band LNB with gaining power 80dB.
3. Annually paint may protect to avoid rusts on dish antenna. It is another reason for drop the signal.
4. Cable and Connectors should be changed one time in every three years.
What LNB use for DD free dish setup box frequency setting?
DD free dish setup box frequency setting LNB is Ku Band and LNB frequency range normally is
9750-10600.There are many LNBs are available in the market but some special
brands like Sharp, Solid , Universal are
best for uninterrupted signal reception from the satellite.
How to tune DD Free Dish Set Top Box ?
DD Free Dish Frequency setting another impotent point is channel scan.As DD Free Dish provides us free to air channels so,we select FTA Mode for scan all the TPs. There are two types of SCANNING function like BLIND SCAN and MANUAL SCAN. BLIND SCAN function all new transponder automatically install our DD free Dish set top box. MANUAL SCAN only tune transponders which we MANUALLY insert the set top box.
A.BLIND SCAN
LNB Type – Universal/Ku Band
1. LNB Frequency-9750-10600
2. Alternet LNB Frequency-10600-10600
3.Mode-FTA Only
4. Type -22K is AUTO
5.Service-TV Channel +Radio Channel
1.Select TP List than Press “Ok”
2.Now, there are four options are available, Add ( Red Button), Edit (Green Button), Delete (Yellow Button) and Scan (Blue Button ). Most of the satellite
receiver’s remote control has Red, Green Yellow and Blue buttons respectively for
such operation.